Caydo 99PCS Christmas Ornament Kit Including 3 Inch Embroidery Hoop, Christmas Plaid Fabric, Heat transfer pattern and Artificial Pine Needles, Artificial Small Berrie for DIY Craft Christmas Decoration
Package Including:
12 x embroidery hoop
12 x Christmas Plaid
24 x Artificial Pine Needles
50 x Red Berry
1 x heat transfer map

How to use thermal transfer patterns:

First prepare the fabric, heat transfer pattern, release paper, ironing pad, and ordinary electric iron (non-steam)
1. Cut a small piece of the pattern you want to print
2. Lay the ironing pad on a flat platform
3. Spread the fabric flat on the ironing pad
4. The pattern is placed face up on the fabric, and a piece of release paper is laid on it
5. Turn the iron to the "cotton" position and turn off the steam
6. Press down hard with both hands and scald for 10-20 seconds
7. Remove the iron and tear off the pet film while it is hot
8. If there is a warped edge, directly put a release paper on it, and re-iron for 5-10 seconds
9. Remove the isolation paper, the pattern is perfectly presented

Precautions:

1. The fabric must be laid flat, choose the heat transfer position, turn off the steam on the iron (preferably not using a steam iron), press down forcefully for 10 seconds at a temperature of 120-150 degrees Celsius, pay attention to the pressure must be sufficient, the force must be even, try to do To seamless pressing.
2. After ironing, you must tear off the transparent film while it is hot (the heat transfer is mainly hot tearing).
3. Wash after 24 hours, try to wash by hand when washing, avoid rubbing the pattern part.